100% Satisfaction Guarantee.

The SR-EX StroboRack Expander Module fits easily in the rear panel of your StroboRack and increases its capabilities far beyond those of any tuner on the market today. It’s affordable, takes only a few minutes to install, and it makes tuning all the following instruments possible.

For remote Octave +/- selection (490-ST and StroboRack only).

Soft but durable, with double zippered flap top, space for additional accessories, and an adjustable/removable shoulder strap.

Converts any AutoStrobe™ model to a 19" rack format. AutoStrobe™ 490 not included.

StroboRack Remote Footswitch for hands-free muting.

AutoStrobe remote footswitch. For remote Note/Octave Increment (490-ST only), MUTE (490, 490-ST) and Metronome Start/Stop (590 only).

This is a handy adjustable clamp which holds the tuner in a good viewing position by clamping onto virtually any surface. The jaw is wide enough to grip anything from a thin microphone stand to an Ultimate Support type keyboard stand or the leg of a steel guitar.

Complete assembly for mounting the StroboPlus HD to a mic stand, music stand, or pedal steel leg. The Pitch Holder clamp and swivel mount are included. Can also be used with the Body BeatSync metronome.

Protect your StroboPLUS HD or StroboPLUS HDC from harm with this thermoformed EVA foam series case from Peterson. This case offers serious protection for the StroboPLUS series tuners and makes transporting them both convenient and comfortable. Accurately sized to keep the StroboPLUS firmly in place. Easily keep your charging cable and wall adaptor with your tuner between gigs. Built-in foam cut-out slot will keep your charging/data cable in place. The inside mesh pocket can accommodate packs of strings or guitar picks to keep handy with your tuner. An easy-glide zipper keeps the case closed during transport. RECOMMENDATION: When adding items to inner pocket, please insert the tuner with the display side down for maximum screen protection.

• Lightweight, semi-rigid design
• Durable and long wearing
• Weather resistant material - NOT waterproof
• Decorative Peterson logo on case lid
• Foam insert is removable

Pitch Holder™ mounting bracket for the: • StroboPlus HD • StroboFlip tuner • BBS-1 Body Beat Sync

The ATR1100x handheld microphone is tuned for clear audio reproduction. The mic’s unidirectional polar pattern focuses pickup on the sound source and protects against feedback, making the ATR1100x a fine, all-purpose mic for use when tuning acoustic instruments. Featuring an on/off switch and a permanently attached 3 m (9.8') cable with a 3.5 mm (1/8") mini-plug. The ATR1100x is a great choice for use with any Peterson tuner that features a ¼” input to provide added directionality control of incoming signals. The mic comes with a desk stand and a 6.3 mm (1/4") adapter.

• Element: Dynamic
• Polar Pattern: Unidirectional
• Frequency Response: 80 – 12,000 Hz
• Open Circuit Sensitivity: -54 dB
• Weight: 150 g (5.3 oz)
• Cable: Flexible, durable 3 m (9.8') permanently attached cable with 3.5 mm (1/8") mini-plug
• Accessories Included: Desk stand, 6.3 mm (1/4") adapter

Replacement power adaptor for the StroboFlip™ Virtual Strobe™ tuner. Several variations are available depending on your region. Please select the supply according to your area.

Replacement power supply for the VS-II™ and V-SAM™ tuners. Not for StroboStomp™, StroboStomp2™, or StroboFlip™ Tuners. Specifications: INPUT: 100~240V, 50/60Hz 30-40W OUTPUT: DC3.3V, 280mA

Remote Vibrating Clip for: • BB-1 Body Beat Metronome • BBS-1 Body Beat Sync • StroboPlus HD • StroboPLUS HDC • Color is black.

Dynamic microphone for isolation and sensitivity directly from vibrating surfaces.

The Peterson TP-3 Clip-On Tuning Pickup includes a more sensitive piezo pickup than any previous model to improve the signal transmission of your acoustic instrument into your tuner. The larger opening can now accommodate even the most challenging placement. Higher gripping tension ensures that the TP-3 stays in place without damaging your instrument. Use with any instrument and any tuner. Totally isolate your instrument from any other sound in the room, permitting confident tuning even in the noisiest environments Clips onto the lead pipe, barrel of a flute, or any round tubing on horns with no marring to the instrument Jaws feature padded ends to clip on the bell of the horn of brass instruments or various parts of a stringed instrument. No batteries required. 1/4" input jack is compatible with many instrument tuners. Long, heavy-duty cord with strain relief for added durability and longer life. The perfect accessory when used with original Peterson tuning hardware.

Swivel Mount for attaching StroboPlus HD to Pitch Holder clamp. Designed for mounting to a mic stand, music stand, or pedal steel leg. Can also be used with the Body BeatSync metronome.

USB Charger for: - Body Beat Sync® metronome. - StroboPlus HD 5V/.5A

The PitchGrabber Mobile tuning pickup easily and safely clamps on to virtually any musical instrument and captures the pitch using its piezo pickup sending it directly to your mobile tuning application. The PitchGrabber Mobile uses the headphone/mic input of your mobile device to completely isolate the sound of your instrument and provide a direct input path to your tuning application. Perfect for tuning in noisy environments. 90-day exchange warranty.

This adaptor cable has been specifically designed to function with your mobile Apple or Android phone/tablet device. Connect an instrument, microphone, or tuning pick-up with a 1/4” plug directly into your device using the headphone jack. Directly plug in your guitar or bass for tuning or use an external microphone to tune brass or wind instruments. *Compatible with the lightning-to-audio adaptor cable from Apple. Can be used with any application requiring an audio input. Will not interfere with charger connector. iPod, iPhone and iPad are registered trademarks of Apple Inc., registered in the U.S. and other countries. 90-day exchange warranty.

Small, lightweight, and portable with a protective cover. Enables the iPod® touch to be used with applications requiring a microphone. Can be attached to a key ring or lanyard for easy access. The sensitivity is perfect for use with the iStroboSoft™ tuning application by Peterson Tuners. Easily tune your acoustic guitar, woodwind, or brass instruments. Can be used with any iTunes application that uses a microphone as an input. Also works with iPod® Classic, iPhone™, iPad™ and iPod® Nano to be used as a recording device. NOT FOR USE WITH 1ST GEN. IPOD TOUCH. This device will require a dock connector mic.

Just like a cell phone screen protector, this tempered glass screen protector will help protect your StroboStomp HD screen from most damage from scratches and scuffs to keep it looking its best from gig to gig! Easy, bubble-free installation makes it simple to add quality screen protection to your favorite tuning pedal.

• Fingerprint Resistant
  It’s fingerprint resistant so you can keep your screen smudge-free. Hydrophobic and oleophobic clear layers work as the final coating to protect your screen from fingerprints, liquids, and stains.
• HD Clarity
  Keeps the screen brightness without added glare and does not create a shadowing effect when viewed from different angles.
• 9H Hardness
  Fortified with anti-shatter glass that features a 9H surface hardness to repel scratches and swirls. The ultra-thin tempered glass design provides edge-to-edge full-screen display protection.
• Bubble-Free
  Bubble-free installation to make application fast. Can be removed and re-applied easily without leaving smudges on the display.
• Three-piece cleaning pack included

* Please perform a dry fit before installing to orient the placement and aid in installation. The side that peels off is the side that should be placed over a clean display. Existing swirls and/or scratches may show through the protector. This is normal.

Use this adaptor to plug your instrument or microphone into your computer's sound card when using StroboSoft™. This will convert from 1/4" (F) to 3.5mm (M)