Accessories / 1-100 / Popularity
Adaptor Cable for Mobile Devices
This adaptor cable has been specifically designed to function with your mobile Apple or Android phone/tablet device.
Connect an instrument, microphone, or tuning pick-up with a 1/4” plug directly into your device using the headphone jack. Directly plug in your guitar or bass for tuning or use an external microphone to tune brass or wind instruments.
*Compatible with the lightning-to-audio adaptor cable from Apple.
Can be used with any application requiring an audio input. Will not interfere with charger connector.
iPod, iPhone and iPad are registered trademarks of Apple Inc., registered in the U.S. and other countries.
90-day exchange warranty.
Mini Capsule Mic for iPhone and iPod
Small, lightweight, and portable with a protective cover. Enables the iPod® touch to be used with applications requiring a microphone. Can be attached to a key ring or lanyard for easy access. The sensitivity is perfect for use with the iStroboSoft™ tuning application by Peterson Tuners. Easily tune your acoustic guitar, woodwind, or brass instruments. Can be used with any iTunes application that uses a microphone as an input. Also works with iPod® Classic, iPhone™, iPad™ and iPod® Nano to be used as a recording device. NOT FOR USE WITH 1ST GEN. IPOD TOUCH. This device will require a dock connector mic.
TP-3 Clip-On Pickup
The Peterson TP-3 Clip-On Tuning Pickup includes a more sensitive piezo pickup than any previous model to improve the signal transmission of your acoustic instrument into your tuner. The larger opening can now accommodate even the most challenging placement. Higher gripping tension ensures that the TP-3 stays in place without damaging your instrument. Use with any instrument and any tuner.
Totally isolate your instrument from any other sound in the room, permitting confident tuning even in the noisiest environments Clips onto the lead pipe, barrel of a flute, or any round tubing on horns with no marring to the instrument Jaws feature padded ends to clip on the bell of the horn of brass instruments or various parts of a stringed instrument.
No batteries required.
1/4" input jack is compatible with many instrument tuners.
Long, heavy-duty cord with strain relief for added durability and longer life.
The perfect accessory when used with original Peterson tuning hardware.
Pitch Grabber Mobile Tuning Clip
The PitchGrabber Mobile tuning pickup easily and safely clamps on to virtually any musical instrument and captures the pitch using its piezo pickup sending it directly to your mobile tuning application. The PitchGrabber Mobile uses the headphone/mic input of your mobile device to completely isolate the sound of your instrument and provide a direct input path to your tuning application. Perfect for tuning in noisy environments.
90-day exchange warranty.
Body Beat Vibe Clip
Remote Vibrating Clip for: • BB-1 Body Beat Metronome • BBS-1 Body Beat Sync • StroboPlus HD Color is white.
StroboPlus HD Pitch Holder Assembly
Complete assembly for mounting the StroboPlus HD to a mic stand, music stand, or pedal steel leg. The Pitch Holder clamp and swivel mount are included. Can also be used with the Body BeatSync metronome.
USB AC Adapter/Charger
USB Charger for: - Body Beat Sync® metronome. - StroboPlus HD 5V/.5A
StroboFlip Power Supply
Replacement power adaptor for the StroboFlip™ Virtual Strobe™ tuner. Several variations are available depending on your region. Please select the supply according to your area.
VS-1 / VS-2 / V-SAM Power Supply
Replacement power supply for the VS-II™ and V-SAM™ tuners. Not for StroboStomp™, StroboStomp2™, or StroboFlip™ Tuners. Specifications: INPUT: 100~240V, 50/60Hz 30-40W OUTPUT: DC3.3V, 280mA
Unidirectional Dynamic Handheld Microphone - for better isolation and pickup of acoustic sources (for all Virtual and AutoStrobe™ tuner models). Comes with an on/off switch so you can leave it connected when not in use.
Suction Cup Pickup
Dynamic microphone for isolation and sensitivity directly from vibrating surfaces.
Use this adaptor to plug your instrument or microphone into your computer's sound card when using StroboSoft™. This will convert from 1/4" (F) to 3.5mm (M)
Pitch Holder™ mounting bracket for the: • StroboPlus HD • StroboFlip tuner • BBS-1 Body Beat Sync
Swivel Mount for StroboPlus HD
Swivel Mount for attaching StroboPlus HD to Pitch Holder clamp. Designed for mounting to a mic stand, music stand, or pedal steel leg. Can also be used with the Body BeatSync metronome.
AutoStrobe Rack Kit
Converts any AutoStrobe™ model to a 19" rack format. AutoStrobe™ 490 not included.
For remote Octave +/- selection (490-ST and StroboRack only).
VS-1 / VS-2 / V-SAM Pitch Holder
This is a handy adjustable clamp which holds the tuner in a good viewing position by clamping onto virtually any surface. The jaw is wide enough to grip anything from a thin microphone stand to an Ultimate Support type keyboard stand or the leg of a steel guitar.
AutoStrobe Single Footswitch
AutoStrobe remote footswitch. For remote Note/Octave Increment (490-ST only), MUTE (490, 490-ST) and Metronome Start/Stop (590 only).
AutoStrobe Soft Case
Soft but durable, with double zippered flap top, space for additional accessories, and an adjustable/removable shoulder strap.
StroboRack Remote Mute Footswitch
StroboRack Remote Footswitch for hands-free muting.
Body Beat Pulse Solo
The Body Beat Pulse™ Solo extends the extremely popular Peterson Body Beat’s tactile tempo feedback to a very affordable device that uses the audio output of any metronome app or traditional metronome that has a headphone output jack. The “Pulse” can also deliver accented beats for subdivisions when used with the Peterson Body Beat Metronome App (iOS) or other Peterson-approved apps (iOS & Android). Feel the beat from the Body Beat Pulse™ Solo Clip!
StroboPLUS HD/HDC Case
Protect your StroboPLUS HD or StroboPLUS HDC from harm with this thermoformed EVA foam series case from Peterson. This case offers serious protection for the StroboPLUS series tuners and makes transporting them both convenient and comfortable. Accurately sized to keep the StroboPLUS firmly in place. Easily keep your charging cable and wall adaptor with your tuner between gigs. Built-in foam cut-out slot will keep your charging/data cable in place. The inside mesh pocket can accommodate packs of strings or guitar picks to keep handy with your tuner. An easy-glide zipper keeps the case closed during transport.
RECOMMENDATION: When adding items to inner pocket, please insert the tuner with the display side down for maximum screen protection.
- Lightweight, semi-rigid design
- Durable and long wearing
- Weather resistant material - NOT waterproof
- Decorative Peterson logo on case lid
- Foam insert is removable