Does my StroboStomp Mini require calibration?

Generally, your StroboStomp Mini will not require calibration and should remain perfectly accurate if it has not been damaged.

Unlike more modern Peterson strobes, legacy models such as the Peterson 400, 420, 450 and 700 do require occasional calibration.

If you require service, please open a support ticket and return the tuner for repair.

Was this helpful?

Help others find this information sooner.

I want to power my tuner via USB. What power supplies are available with USB power output?

Many pedalboard power supplies are now including 5v USB power output. Below is a partial list of power supplies with 5v USB output.

  • CIOKS DC7
  • CIOKS 8
  • Fender Engine Room LVL8
  • Fender Engine Room LVL12
  • Rockboard ISO Power Block V16
  • Mission Engineering 529 USB Pedal Power Supply
  • Mission Engineering 529i Recharge
  • Gator GTR-PWR-12
  • Joyo JP-05 Power Supply 5
  • Onstage PS1000
  • Lotkey Power Supply Portable 7
  • Pedal Tank Pocket DC

Was this helpful?

Help others find this information sooner.

What power supplies can be used with my Peterson Pedal Tuner? ( StroboStomp 1 & 2, Stomp Classic & StroboStomp HD/LE/Mini )

9VDC - Regulated - Center negative - At least 85mA

Partial list of regulated power supplies:

  • Voodoo Lab Pedal Power 2 (Eight isolated 9VDC 100mA regulated outputs)
  • Dunlop DCB-10 DC Brick (10 outputs)
  • Visual Sound 1-Spot (9V fully regulated output)
  • Carl Martin Big John 9v Power Supply (Seven 9VDC outputs 600mA total)
  • Sanyo Pedal Juice
  • T-Rex Fuel Tank
  • Godlyke PA9 Power All (9V 800mA regulated output)
  • Boss PSA120 adapter (9V 200mA regulated)
DO NOT use the Boss ACA120 Unregulated power supply! Boss ACA, Danelectro DA1, RadioShack, etc., do not have a voltage regulator and are not suitable.

As always with any pedal, be careful - check voltage ( 9V regulated ) & polarity (positive barrel-negative inner sleeve) first and don't overload the power supply's ampere rating by daisy chaining too many pedals from a single supply.

Was this helpful?

Help others find this information sooner.

How do I read a strobe display?

Basically, the strobe image appears to travel to the left if your instrument is flat of the desired pitch and to the right if it is sharp. On earlier models such as the StroboStomp 1, StroboStomp 2, VS-1, VS-II and V-SAM, the strobe image travels upward if your instrument is sharp and downward if your instrument is flat of the desired pitch.

Adjust your instrument until the pattern is as close to still as possible. Strobe displays are 'real-time' and extremely precise. They require very fine tuning adjustments to stop the display because the frequency/pitch of any instrument is never totally stable.

You'll quickly learn to read the display, make the most precise adjustments and appreciate the high resolution that only a Peterson provides.

Was this helpful?

Help others find this information sooner.

Is the accuracy the same for all Peterson tuners?

Yes, the accuracy is within 0.1 cents (1/1000 of one semitone) as with all Peterson Strobe Tuners. An important thing to note is that Peterson Strobe Tuners have ultra high definition displays, so not only are they highly accurate in detecting a note but they have the ability to display that accuracy. Other products claim accuracy but do not have the high definition screen to display the level of accuracy in which they claim. If you cannot see the accuracy, it is of little value. Only Peterson provides High Definition Strobe Tuning.

How Accurate Is My Tuner?

Was this helpful?

Help others find this information sooner.

Peterson Connect does not detect my StroboStomp Mini in Linux environment.

Chrome needs access to /dev/hidraw*, so either set "chmod a+rw /dev/hidraw*" or start chrome as root with the --no-sandbox option

*Some Ubuntu based distros do not allow running Chrome as root with the --no-sandbox option enabled. -Running as root without --no-sandbox is not supported. See https://crbug.com/638180. You can however run Chromium as a normal user and invoke that option.

Some users have reprted a fix by adding a new udev rule as follows: KERNEL=="hidraw*", SUBSYSTEM=="hidraw", MODE="0664", GROUP="plugdev", ATTRS{idVendor}=="2368", ATTRS{idProduct}=="*SEE BELOW"

* Some Peterson products operate in two different modes with individual product id's for firmware update operations. Multiple rules may need to be created. Here is the list of Peterson USB product ID's

idProduct =

Stomp Classic = 8002
StroboPLUS HD = 0003
StroboPLUS HD Firmware Mode = 8003
StroboClip HD = 8004
StroboStomp HD = 8005
StroboPLUS HDC = 0006
StroboPLUS HDC Firmware Mode = 8006

If there is trouble connecting or reconnecting as a product is switching modes, ex: StroboPLUS HDC product id 0006 to StroboPLUS HDC Firmware Mode 8006 run the command:

"sudo chmod a+rw /dev/hidraw*"

This command will solve any "waiting on user input" or if the update button in Peterson Connect is unresponsive. The command may need to be executed more than once.

Was this helpful?

Help others find this information sooner.

What is my StroboStomp Mini’s Sweetened Tunings feature all about?

A Sweetener is a set of cent offsets or a deviation from generic Equal Temperament interval spacing traditionally used in tuning. Tuners made by Peterson, including the StroboStomp Mini, contain many choices of Sweeteners, in other words, several presets with differing interval spacing relevant to the instrument being tuned. If you’ve never been happy with how your instrument tunes up with your present tuner, a Sweetener could be just the thing to change that without any modifications whatsoever. The StroboStomp Mini offers Over 80 unique and very accurate tweaks which often make all the difference.

Peterson Tuners - Sweetened Tunings

Was this helpful?

Help others find this information sooner.

What is a Guided Tuning?

Guided Tuning is a new feature in tuners, it allows the user to tune to specified tunings, be they dropped, open, alternative etc. without having to know the correct note names. The tuner replaces the note name with a string number which the user simply uses as a guide while adjusting the pitch of the string so that the string number displayed on the tuner matches the string number being plucked.

The result is an accurately tuned guitar tuned to the required alternative tuning.

Using Peterson Guided Tuning, it is not only possible to try out new tunings without any other reference whatsoever, it is also entirely possible for someone with no previous musical experience at all to consistently, accurately and easily tune a 5, 6, 7, 8 or 9-string guitar to any tuning.

Was this helpful?

Help others find this information sooner.

Which Peterson products work with Peterson Connect?

Currently, the following products are compatible with Peterson Connect:

  • StroboClip HDC
  • StroboStomp Mini
  • StroboPLUS HDC
  • StroboClip HD
  • StroboStomp HD
  • StroboStomp LE
  • StroboPLUS HD
  • Stomp Classic Pedal Tuner / Active DI

Was this helpful?

Help others find this information sooner.

How accurate is my StroboStomp Mini?

Your StroboStomp Mini is accurate to 0.1 cent (1/1000th of a semitone). It’s important to note, that unlike other tuners which list the detection accuracy as the main specification, the StroboStomp Mini detection AND display accuracy is 0.1 cent due to its high definition display.

How Accurate Is My Tuner?

Was this helpful?

Help others find this information sooner.

I often tune my acoustic instrument in a loud environment. What's available to help with that?

When tuning an acoustic instrument in an environment where you cannot control the background noise, like at a gig or loud band hall, a vibration pickup is a very nice alternative to using the built-in microphone.

A Peterson TP-3 clip-on tuning pickup is a very versatile device with a 1/4" connector that can be clipped onto any portion of the instrument that vibrates, such as the headstock of a guitar or the bell or lead pipe of a horn.

A Peterson Pitch Grabber Mobile Tuning Clip utilizes a 1/8" connector for use in mobile phones or tablets with software tuners.

For instruments with a flat resonating surface, you can use a suction cup tuning pickup to reduce ambient noise interference.

Was this helpful?

Help others find this information sooner.

How do I send my product in for repair?

If you need to send your product in for repair, please open a support ticket.

If you have not registered your tuner, you must do so before opening your support ticket.

All products returned for service must have a support ticket number on the outside of the box as well as on the accompanying paperwork on the inside of the box.

We strongly recommend shipping with tracking information and insurance.
Peterson Electro-Musical Products, Inc., and subsidiaries thereof, are not responsible for lost packages in transit to our repair facility.

Include a description of your problem in both your support ticket and paperwork included with your product. Please be specific about the type of malfunction as well as the conditions under which it occurs. Include your name, address, phone number, and email address on the accompanying paperwork.

There is a minimum charge of $95.00 US plus return shipping charges for all Mechanical Peterson tuners received and a minimum charge of $48.00 US plus return shipping charges for all LCD Peterson tuners (unless subject to Peterson warranty). If you would like an advance estimate for service, you must include a request in writing with the product you ship. If you choose not to have your product repaired, there is a $48 diagnostic charge plus return shipping.

Payment options include PayPal, VISA, MasterCard, AMEX and Discover Card.

Any balance is due within 30 days of the completion of the repair. After 30 days, a storage fee will be charged. After 90 days, your property will be considered abandoned and will disposed of at our discretion.

For international (non-USA) repairs and for all Conn and Node tuner repairs, please open a support ticket as different procedures may apply.


Contact and Shipping Details:

For service of Peterson tuners:

Peterson Electro-Musical Products, Inc.
11601 South Mayfield Ave. Alsip, IL 60803 USA
TEL: 708-388-3311 (ext. 143) FAX: 708-388-3341
Email: techwest@petersonemp.com

Was this helpful?

Help others find this information sooner.

What is the frequency response range of the StroboStomp Mini?

The frequency response range of the StroboStomp Mini is 16.35Hz to 7302Hz.

Was this helpful?

Help others find this information sooner.

Which browsers support Peterson Connect?

Google Chrome, Chromium, Microsoft Edge, Opera, Vivald and Comodo Dragon all support Peterson Connect which is built on webHID, a feature more and more browsers are adopting. As other browsers incorporate the webHID feature, Peterson Connect will immediately work in that browser. Those who prefer a different browser can design sweeteners and presets in any browser. Only the data transfer to your device relies on Peterson Connect.

Peterson Connect will not function in Safari. Custom Configuration, Sweetener Design, and Tempo Map designer will function in Safari, but Safari does not support webHID therefore data transfer to your device is not possible.

Was this helpful?

Help others find this information sooner.

What is the note range of the StroboStomp Mini?

The note range of the StroboStomp Mini is: C0 - A#8

Was this helpful?

Help others find this information sooner.

What is Quick Configuration and how do I use it?

Quick Configuration is a simplified version of our Custom Configuration tool which allows you to add or remove Sweetener categories from your device, assign a color to all Sweeteners within a category, and reorder Sweetener categories on your device.

To access the Quick Configuration tool you must first register your product and pair it with Peterson Connect via a USB cable.

The Quick Configuration tool may be found in three places. Look for the stopwatch icon to identify the Quick Configuration tool:

  1. The post registration screen
  2. The Custom Configuration Screen
  3. The device connection dropdown menu

Peterson Connect | Quick Configuration

Was this helpful?

Help others find this information sooner.

What are the buffer specifications for the StroboStomp Mini?

The StroboStomp Mini buffer specifications are listed below:

Input impedance:

  • Mute: 5M ohm
  • Unmute: 5M ohm


  • Output Impedance:

  • Mute: 1K Ohm
  • Unmute: 100 Ohm


  • THD: 0.04% or less at nominal input level


    SNR: (at +4dbv, +14 above nominal level)

  • 106 dB or greater, un-weighted
  • 108 dB, A weighted
  • Was this helpful?

    Help others find this information sooner.

    I do not see the Tune Screen when I power my StroboStomp Mini via USB. How do I fix that?

    When powering your StroboStomp Mini via USB there must first be an instrument cable inserted in the input jack. If a cable is inserted in the input, your StroboStomp Mini will show the Tune Screen immediately when powered on.

    Powering via USB without a cable in the input jack will result in Update Mode being displayed.

    If you wish to access the Tune Screen without a cable in the input jack while powered via USB, press the Stomp Switch, or the Menu Up and Plus Value Button simultaneously, to exit Update Mode and enter the Tune Screen.

    Was this helpful?

    Help others find this information sooner.

    What are the dimensions of the StroboStomp Mini?

    The dimensions of the StroboStomp Mini are: 94mm x 46mm x 33.5mm ( without switch )

    Was this helpful?

    Help others find this information sooner.

    I received a replacement lens cover for my StroboStomp Mini. How do I install it?

    Please follow the instructions below for your particular product:


    StroboStomp HD/LE:
    StroboStomp HD Plastic LCD Cover Replacement


    StroboStomp Mini
    StroboStomp Mini Plastic LCD Cover Replacement

    Was this helpful?

    Help others find this information sooner.

    What should I do if my new Peterson product doesn't seem to work properly?

    If you've first tried all of the solutions offered here, please contact Peterson directly. It is important that you do NOT return the product to the store in which you purchased it without Peterson instructing you to do so. If your unit is problematic, we would like to limit the chances of another customer purchasing the returned unit. Always arrange for product service or replacement directly with Peterson.

    Was this helpful?

    Help others find this information sooner.

    Windows 10/11 presents "USB device can't be recognized" error when I plug in my tuner.

    If Windows 10 or 11 presents the error "USB device can't be recognized" when your tuner is plugged in, this is usually caused by a corrupt automatic driver installation.

    A restart of your computer will usually solve this issue.

  • Click Windows/Start button
  • Select Power
  • Select Shut Down
  • After your computer powers off, restart your computer, plug in your tuner, and the USB drivers should install automatically.

    Was this helpful?

    Help others find this information sooner.

    What is the range of Hz calibration or Concert A calibration of my StroboStomp Mini?

    The Hz calibration range of your StroboStomp Mini is 390Hz to 490Hz. The default setting is Concert A 440Hz.

    Was this helpful?

    Help others find this information sooner.

    I've registered my product warranty but it's not showing up in the list of products that I can configure.

    In order to configure your device, the Peterson website needs to have previously paired your device with your warranty via Peterson Connect when your device is connected via USB. If you've registered your product but have not yet connected, you'll need to do that before you are able to configure your product. When the website detects your device it will prompt you to pair with your product's serial number. If the website detects your device while registering your warranty, it is automatically paired.

    Was this helpful?

    Help others find this information sooner.

    There are no entries matching your search.

    Not finding an answer? Open a support ticket for personalized support of your Peterson product.

    StroboStomp Mini Version 1.0.07

    Friday, August 18, 2023 8:03:00 PM EDT

    • Fixes alternate strobe patterns in Peterson Connect
    • Various Bug Fixes

    StroboStomp Mini Version 1.0.06

    Wednesday, July 26, 2023 4:45:00 PM EDT

    • Preserves Output Mode, Mute Power-Up State and Play Preset after User Config Update
    • Various Bug Fixes

    StroboStomp Mini Version 1.0.05

    Friday, March 24, 2023 3:31:00 PM EDT

    StroboStomp Mini Version 1.0.04

    Saturday, February 25, 2023 12:51:00 PM EST

    • Official Pilot Release
    Enjoy 10% off
    Let's stay connected
    Simply sign up for our email list and we'll send you a unique coupon code, plus other exclusive savings!*
    Restrictions Apply.
    Thanks for joining ouir mailing list!
    Keep an eye on your inbox. Your exclusive offer will be arriving soon.
    * Must enter email address to receive unique promo code. Upon confirmation of eligibility, subscribers will receive a one-time use promo code for 10% off their purchase at PetersonTuners.com, including mechanical tuners, Virtual Series™ strobe tuners, StroboSoft™ desktop software, BodyBeat™ series metronomes, and accessories. Discounts do not apply toward the purchase of iStroboSoft for Android or iOS or Node products. Offer subject to change at any time. Cannot be combined with another promotional offer. To take advantage of this one-time use offer enter your email address and the offer code will be delivered to that address. Please add petersontuners@petersontuners.com to your safe list to prevent your offer from going to spam. Your email address information is kept private. Privacy Policy.
    Need Help?